Publications

Facile Synthesis of Poly(methyl methacrylate) Silica Nanocomposite Monolith by In Situ Free Radical Polymerization of Methyl Methacrylate in the Presence of Functionalized Silica Nanoparticles

Authors: Oehl G., Naga N., Ziegmann G.
Published: Additive Manufacturing of Polymer-Based Composite Materials
DOI/Link: https://doi.org/10.1021/acsomega.3c10338

Recent trends in “conventional” manufacturing of composites

Authors: Ziegmann G., Oehl G., Hefft L. T.
Published: ACS Omega
DOI/Link: https://doi.org/10.1016/B978-0-443-15917-6.00001-3

A Novel Way to Optimize Zero-Waste Prepreg Production Through the Integration of AFP and Online-Prepreg Technologies

Authors: Dutta G. S., Bauer J., Oehl G., Carosella S., Middendorf P., Ziegmann G.
Published: ECCM21
DOI/Link: http://doi.org/10.60691/yj56-np80

Shape Optimization of Wireless Sensor Body for Better Integration in Fibre Composites

Authors: Dutta G. S., Dorbath B., Vossiek M., Ziegmann G.
Published: Zeitschrift Kunststofftechnik
DOI/Link: http://dx.doi.org/10.3139/O999.01072024

A Study of Deployable Structures Based on Nature Inspired Curved-Crease Folding

Authors: Dutta G. S., Meiners D., Ziegmann G.
Published: Polymers
DOI/Link: http://dx.doi.org/10.3390/polym16060766

Enhanced rheological properties of carbon nanotubes reinforced natural rubber/butadiene rubber nanocomposites

Authors: Du Z., Du Y., Ziegmann G., Zhao H., Zhao S.
Published: Polymer Composites
DOI/Link:https://doi.org/10.1002/pc.28218

Comparison of carbon-reinforced composites manufactured by vacuum assisted resin infusion with traditional and fully recyclable epoxy resins

Authors: Tosto C., Saitta L., Barouni A., Sarasini F., Tirilló J., Bavasso I., Ziegmann G.
Published: Polymer Composites
DOI/Link: https://doi.org/10.1002/pc.28858

Development and Multifunctional Characterization of a Structural Sodium-Ion Battery Using a High-Tensile-Strength Poly(ethylene oxide)-Based Matrix Composite

Authors: Iyer V., Petersen P., Geier S., Wierach P.
Published: ACS Applied Energy Materials
DOI/Link: https://doi.org/10.1021/acsaem.4c00281

The effect of low temperatures on monitoring structural health using acoustic-ultrasonic piezoelectric transducers on composite structures

Authors: Galiana S., Moix-Bonet M., Schmidt D., Wierach P.
Published: e-Journal of Nondestructive Testing
DOI/Link: https://doi.org/10.58286/29667

Innovative welding integration of acousto-ultrasonic composite transducers onto thermoplastic composite structures

Authors: Galiana S., Moradi M., Wierach P., Zarouchas D.
Published: Structural Health Monitoring
DOI/Link: https://doi.org/10.1177/14759217241247766

Design and Characterization of Poly(ethylene oxide)-Based Multifunctional Composites with Succinonitrile Fillers for Ambient-Temperature Structural Sodium-Ion Batteries

Authors: Iyer V., Petersen J., Geier S., Wierach P.
Published: MDPI Polymers
DOI/Link: https://doi.org/10.3390/polym16192806

Simulative cure optimisation of thick and ultra-thick laminates using multiple epoxy resin systems

Authors: Möllers H., Schmidt C., Steuernagel L., Meiners D.
Published: SAMPE Europe 24 Conference, Belfast
DOI/Link: https://www.researchgate.net/publication/384724884...

Die Online-Prepregtechnologie – Ein neuartiges, kostengünstiges und ressourcenschonendes Herstellungsverfahren zur Produktion von Faserverbundbauteilen

Authors: Hefft L. T., Oehl G., Ziegmann G.
Published: 5. Niedersächsisches Symposium Materialtechnik
DOI/Link: http://dx.doi.org/10.21268/20230705-0

Mechanical Performance Evaluation of Fiber Composites Equipped with In-Situ Wireless Sensor Bodies

Authors: Dutta G. S., Ziegmann G., Li W., Dorbath B., Vossiek M., Guhathakurta J.
Published: 5. Niedersächsisches Symposium Materialtechnik
DOI/Link: https://doi.org/10.21268/20230627-4

Passive, Wireless In Situ Millimeterwave Sensor With Mounted Dielectric Channels for Cure Monitoring of Carbon Fiber-Reinforced Polymers

Authors: Dorbath B., Schür J., Ziegmann G., Vossiek M.
Published: IEEE Sensors Journal
DOI/Link: https://doi.org/10.1109/JSEN.2023.3310739 

Einfluss von Sprühbinder auf die Permeabilität von Faserpreforms und deren Betrachtung in Infusionssimulationen

Authors: Möllers H., Meiners D., Schmidt C.
Published: 5. Niedersächsisches Symposium Materialtechnik
DOI/Link: http://dx.doi.org/10.21268/20230627-6

Adhesion-cohesion balance of prepreg tack in thermoset automated fiber placement. Part 2: Ply-ply cohesion through contact formation and autohesion

Authors: Budelmann D., Schmidt C., Steuernagel L., Meiners D.
Published: Composites Part C: Open Access
DOI/Link: https://doi.org/10.1016/j.jcomc.2023.100396

A Study of Free-Form Shape Rationalization Using Biomimicry as Inspiration

Authors: Dutta G. S., Meiners D., Merkert N.
Published: Polymers
DOI/Link: https://doi.org/10.3390/polym15112466

Influence of Epoxy Spray Binder on Infusion and Cure in Liquid Composite Molding Processes

Authors: Möllers H., Schmidt C., Meiners D.
Published: Applied Composite Materials
DOI/Link: http://dx.doi.org/10.1007/s10443-023-10189-7

Effect of the Piezoceramic Embedment on the Robustness and Lamb Waves Transmission of Acoustic-Ultrasonic Transducer

Authors: Galiana S., Wierach P., Schmidt D., Moix-Bonet M., Fohlmeister L.
Published: ICCM 2023 Conference, Belfast
DOI/Link: https://az659834.vo.msecnd.net/eventsairwesteuprod...

Acousto-ultrasonic composite transducers integration into thermoplastic composite structures via ultrasonic welding

Authors: Galiana S., Moradi M.; Wierach P., Zarouchas D.
Published: 10th ECCOMAS Thematic Conference on Smart Structures and Materials, Patras
DOI/Link: https://doi.org/10.7712/150123.9847.444412

An Efficient Procedure for Bonding Piezoelectric Transducers to TP Composite Structures for SHM Application and Its Durability in Aeronautical Environmental Conditions.

Authors: Sofi T., Gude M.R., Wierach P., Martin I., Lorenzo E.
Published: MDPI Polymers
DOI/Link: https://doi.org/10.3390/s23104784

Novel Procedure of Integrating Transducers to Thermoplastic Composite Structures by induction Heating for SHM

Authors: Sofi T., Avila J., Gude M.R., Wierach P.
Published: 10th ECCOMAS Thematic Conference on Smart Structures and Materials
DOI/Link: https://doi.org/10.7712/150123.9876.446068

Tack of epoxy resin films for aerospace-grade prepregs: Influence of resin formulation, B-staging and toughening

Authors: Budelmann D., Schmidt C., Meiners D.
Published: Polymer Testing
DOI/Link: http://dx.doi.org/10.1016/j.polymertesting.2022.107709

Spray binder for automated preforming: Spray process and preform properties

Authors: Möllers H., Schmidt C., Meiners D.
Published: Polymer Composites
DOI/Link: http://dx.doi.org/10.1002/pc.27107

Schwierigkeiten bei der Verwirklichung der Kreislaufwirtschaft in 3D-Druckunternehmen – Ein empirischer Ansatz mithilfe Qualitativer Datenanalyse

Authors: Dutta G. S., Gopalakrishna S.
Published: Entrepreneurship der Zukunft
DOI/Link: http://dx.doi.org/10.1007/978-3-658-37926-1_11

A review of mode I dominant interfacial fracture toughness test methods of skin-core bonding for thermoplastic composite sandwich structures

Authors: Weidmann F., Ziegmann G., Wieser J.
Published: Journal of Thermoplastic Composite Materials
DOI/Link: https://doi.org/10.1177/08927057221083

Parameter estimation and its influence on layered metal–composite–metal plates simulation

Authors: Dileep P. K., Hartmann S., Hua W., Palkowski H., Fischer T., Ziegmann G.
Published: Acta Mechanica
DOI/Link: https://doi.org/10.1007/s00707-022-03245-z

Reducing the raw material usage for room temperature infusible and polymerisable thermoplastic CFRPs through reuse of recycled waste matrix material

Authors: Gebhardt M., Manolakis I., Chatterjee A., Kalinka G., Deubener J., Pfnür H., Chakraborty S. and Meiners D.
Published: Composites Part B, 2021

Einfluss der Feuchtigkeitsaufnahme hybrider Fibre Metal Laminates (FMLs) auf das mechanisch-physikalische Verhalten

Authors: Fischer T., Ziegmann, G.
Published: Symposium Materialtechnik, 2021

Recycling of Elium CFRPs for high temperature dissolution: A study with different solvents

Authors: Tschentscher C., Gebhardt M., Chakraborty S. and Meiners D.
Published: Symposium Materialtechnik, 2021

Co-Injection as an adhesive free viable joining technique using bulk ABS

Authors: Wang S., Sdrenka S., Herden C., Chakraborty S., Ziegmann G. and Meiners D.
Published: Symposium Materialtechnik, 2021

Adhesion-cohesion balance of prepreg tack in thermoset automated fiber placement. Part 1: Adhesion and surface wetting

Authors: Budelmann D., Schmidt C., Meiners D.
Published: Composites Part C: Open Access
DOI/Link: https://doi.org/10.1016/j.jcomc.2021.100204

Correlation of in-situ Raman spectra with isothermal DSC-measurements on radically polymerizing methyl methacrylate

Authors: Oehl G., Ziegmann G., Bode K.
Published: 4. Niedersächsisches Symposium Materialtechnik
DOI/Link: http://dx.doi.org/10.21268/20210519-2

Modellierung, Herstellung und Evaluierung von Polymer-Protein-Kompositen mittels additiver Fertigungstechnologien

Authors: Sdrenka S., Schulz M., Marin L. M., Ziegmann G., Bertram J.
Published: 4. Niedersächsisches Symposium Materialtechnik
DOI/Link: https://doi.org/10.21268/20210519-21

Abhängigkeit der viskoelastischen Eigenschaften von Duromeren in Bezug auf deren thermomechanische Kennwerte

Authors: Eggers A., Ziegmann G.
Published: 4. Niedersächsisches Symposium Materialtechnik
DOI/Link: https://doi.org/10.21268/20210519-12

Top-hat crashboxes of thermoplastic fibre-metal-laminates processed in one-step thermoforming: Experimental and numerical study

Authors: Harhash M., Fischer T., Grubenmann M., Hua W., Heingärtner J., Kuhtz M., Gude M., Hora P., Ziegmann G., Palkowski H.
Published: Composites Part B: Engineering
DOI/Link: https://doi.org/10.1016/j.compositesb.2021.109367

Acting Principles of Nano-Scaled Matrix Additives for Composite Structures

Authors: Sinapius M., Ziegmann G.
Published: Part of Springer Nature book series - Research Topics in Aerospace (RTA)
DOI/Link: https://link.springer.com/book/10.1007/978-3-030-68523-2

Experimental and numerical investigations on the quasi-static structural properties of fibre metal laminates processed by thermoforming

Authors: Fischer T., Grubenmann M., Harhash M., Hua W., Heingärtner J., Hora P., Palkowski H., Ziegmann G.
Published: Composite Structures
DOI/Link: https://doi.org/10.1016/j.compstruct.2020.113418

Generative Design for Digital Fabrication

Authors: Dutta G. S., Meiners D.
Published: 4. Niedersächsisches Symposium Materialtechnik
DOI/Link: https://www.researchgate.net/publication/382696807_Generative_Design_for_Digital_Fabrication

Constitutive Modeling and Finite Element Simulation of Metal-Polymer-Metal Sandwich Structures

Authors: Dileep P. K., Hartmann S., Fischer T., Ziegmann G., Hua W., Palkowski H.
Published: 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2021
DOI/Link: https://doi.org/10.23967/composites.2021.070

Closed loop room temperature recycling of CFRPs with an infusible thermoplastic matrix and its effect on 2nd generation properties

Authors: Gebhardt M., Chakraborty S., Manolakis I. and Meiners D.
Published: Journal of Plastics Technology, 2020
DOI/Link: http://dx.doi.org/10.3139/O999.02052020

Recycling of CFRP composites based on a thermoplastic matrix (ELIUM 150) which can be infused and cured at room temperature - Recovery of the matrix by dissolution processes and testing of fibre damage by means of SEM and single fibre tensile test

Authors: Gebhardt M., Chakraborty S., Manolakis I. and Meiners D.
Published: Forschungsfeldkolloquium (TU Clausthal), 2020
DOI/Link: https://www.researchgate.net/publication/343855935_Recycling_of_CFRP_composites_based_on_a_thermoplastic_matrix_ELIUM_150_which_can_be_infused_and_cured_at_room_temperature_-_Recovery_of_the_matrix_by_dissolution_processes_and_testing_of_fibre_damage_

Generative Design Solutions for Free-Form Structures Based on Biomimicry

Authors: Dutta G. S., Steuernagel L., Meiners D.
Published: Simulation Science
DOI/Link: http://dx.doi.org/10.1007/978-3-030-45718-1_8

Prepreg tack: A review of mechanisms, measurement, and manufacturing implication

Authors: Budelmann D., Schmidt C., Meiners D.
Published: Polymer Composites
DOI/Link: https://doi.org/10.1002/pc.25642

Study on processing galvanized steel/PA6 sandwich composites by hot-pressing: Influence of interface properties and surface treatment on the adhesion strength

Authors: Hua W., Fischer T., Harhash M., Ziegmann G., Palkowski H.
Published: Composite Structures
DOI/Link: https://doi.org/10.1016/j.compstruct.2019.111779